There are many bathtub drain stopper types in the market, which may hit you for awhile if you are new in this major. Do you think only plumber who knows about the bathtub drain stopper? Well, you need to think that again.
We are here to help you with the essential information about the bathtub drain stopper types. If you are going to replace a bathtub drain stopper, this article may also help you choose the best one. Let’s check it out now.
- 1 What is the bathtub drain stopper?
- 2 Different Bathtub Drain Stopper Types
- 3 Wrapping up
What is the bathtub drain stopper?
A bathtub drain stopper is a part/device that places in the bathtub drain to hold the water. Meanwhile, you may have heard about the bathtub drain strainer, which is a tool located on the drain to block the hair, debris, and particles on the way. Unlike the stopper, a strainer cannot hold the water.
What is a bathtub drain stopper?
However, the name “stopper” is not an official name. We just call it that way to imply the use of it: stop the water from draining out. When you finish taking a bath, lift this device to remove the water inside the tub.
Well, the most classic and common bathtub drain stopper is the rubber plug coming with a metal chain. However, there are many types of bathtub drain stopper nowadays, which gives you more options for your tub. What are you waiting for? Let’s take a look at these types below and choose the best one.
Different Bathtub Drain Stopper Types
Type 1: Push-pull bathtub drain stopper
This bathtub drain stopper type comes with a set of the metal piece, which has a small knob on the top, a center setscrew, and a small rubber piece to stop the water. The way you install this device is much more comfortable. You will find a set screw under the top cap of the stopper, screw it into the bathtub drain, and now it’s available to use.
Push-pull bathtub drain stopper
The name “push-pull” says it all – it works in the push-pull motion. To close the bathtub drain, push down the stopper until you hear a “click.” To open the drain to remove the old water, gently pull the stopper up. Sound easy and straightforward, right? If you want to buy this, check out these pros and cons, too.
- Easy to install and use
- Durable and long-lasting
- Simple and friendly design
- A bit slippery
Type 2: Lift-turn bathtub drain stopper
Well, you may mistake the lift-turn vs. the push-pull stopper because they have similar design and appearance. The lift-turn stopper is also made of stainless metal, which has a knob on the top of the stopper to lift and turn. The setscrew is also beneath the top cap that you use to install into the bathtub drain.
The only difference between the two tools is the way it works. While the push-and-pull stopper works in the push-pull motion, the other one works in a much different way.
You will need to turn the knob on the top in clockwise (or anti-clockwise) until it cannot go down any more to close the bathtub drain. To open the stopper and drain out the water, lift the knob and turn it in the opposite way.
Lift-turn bathtub drain stopper
Remember not to tighten the stopper too much; otherwise, it’s hard to lift and open it again. You will also need to unplug the stopper occasionally to clean the bathtub drain and get rid of hair or debris.
- Minimal look and design
- Easy to install and use
- Overtightened sometimes
- A bit slippery
Type 3: Toe-touch bathtub drain stopper
You may find this stopper type similar to the two types above, and yes, it is. The minimal design may not get much attention, but it’s useful and efficient. The toe-touch stopper is made of stainless metal, while it especially uses the spring-loaded design. The setscrew under the cap of the stopper is to fit into the bathtub drain.
With the spring-loaded design, you will use this stopper with the pushing motion, which is much more straightforward than the two preceding devices. You can use your toe (or thumbnails) to push down the stopper to close the drain. After you finish the bath, push the stopper again to open and drain out the water.
This is one of the simplest bathtub drain types in the market at an affordable price. However, because this type uses a spring, it may not last longer than other types. The spring will get old and wear out by the time that you need to find another stopper to replace.
Toe-touch bathtub drain stopper
- Easy to use and install
- Simple look and design
- Not slippery
- Not durable
Type 4: Flip-it bathtub drain stopper
The flip-it drain stopper is another straightforward type in the market you should consider. The way it works is absolutely simple and easy, which makes you excited right at the first time. However, let’s get into its design first.
This device has a lever on the cap of the stopper that allows you to move side-to-side to open or close it. There is also an O-ring rubber seal that you will attach inside the stopper to hold it tight and seal it from the water.
The idea is simple. Flip the top knob 180 degrees to the left (or right) to close the stopper and hold water, while flipping the other side to open and drain out the water. Remember that you should attach the rubber seal properly so that the water won’t get through when you close the stopper.
However, the durability of this stopper type is not good as the top knob will wear out after many times of use. You should consider this before buying one.
Flip-it bathtub drain stopper
- Easy to use, install, and replace
- Not slippery
- Not durable
Type 5: Trip lever bathtub drain stopper
The trip lever drain stopper is considered to be the complicated type because of its operation and structure.
A trip lever bathtub drain stopper
Basically, you will see a knob to switch up/down to open/close the drain stopper. This switch is connected with a plunger via a set of rods in the tub overflow pipe (as you can see in the picture). And here is how it works.
When you switch down the trip lever, the plunger will go up to open and drain out the water. On the contrary, the plunger will fall down to close the drain stopper and hold the water when you turn the switch up. It’s not easy to install this device as you must place the set of tools accurately inside the overflow pipe.
- Not easy to install
Type 6: Pop-up bathtub drain stopper
The last type of the list is another complex bathtub drain stopper, which is a bit the same as the trip lever stopper. Well, this type works with the same lever type on the overflow pipe.
Pop-up bathtub drain stopper
When you twist the lever, the set of rods inside the overflow pipe will move and impact the rocker arm connecting to the stopper. There is also a spring to push that rocker arm to operate the stopper.
Turn the lever on the left (or right) to close the stopper. Turn the lever in the opposite way to open it.
Well, as you have just read, the structure of this device is a bit complex, and so, it’s difficult to replace and clean the stopper by yourself. Consider carefully before choosing this type.
- Difficult to replace and clean
- Easy to get hair and particles
So which is the best for you among the bathtub drain stopper types above? Each of them has advantages and disadvantages when it comes to the comparison, but only you can decide which is the best.
As a straightforward user, we recommend you should go for the push-and-pull bathtub drain stopper thanks to its efficient and simple design. The installation is not complicated as you can do it all by yourself, while this tool can last a long time that you don’t need to pay much attention to it. Sound fair enough?
Let’s make your own choice.